is here! Shop now, pay later in 4 easy installments
Two-way Component System: 6.5" (165 mm) Woofer, 1" (25 mm) Silk Dome Tweeter
Born from shared technologies used in our flagship C7 speakers, the C6-650 component system combines the smoothness and transparency of a premium silk dome tweeter with a top-flight component woofer to create a loudspeaker system with exceptional refinement and dynamic capability.
Benefiting from vast woofer design experience and advanced modeling systems of JL Audio, the 6.5" (165 mm) C6 component woofers feature purpose-engineered, cast alloy frames outfitted with our Elevated Frame Cooling technology. A DMA-optimized, forged and machined motor system generates outstanding midbass impact with ultra-low distortion.
The 1" (25 mm) C6 component tweeters feature edge-driven pure silk dome diaphragms for smooth high-frequency performance with remarkable off-axis response and damping. Neodymium motors and ferrofluid cooling provide high-magnetic flux and improved reliability with extended response from a very compact motor system. Surface- and flush-mount fixtures are included to fit a wide variety of installation applications.
Premium passive crossover networks are included with each C6-650 component system. Featuring four levels of tweeter adjustment, these outboard filter networks are equipped with premium polyester film and electrolytic capacitors as well as low-loss air-core inductors — all accessible beneath a protective, polycarbonate cover. Each C6 passive crossover also includes an advanced electronic tweeter protection circuit designed to minimize the possibility of tweeter failure.
C6 Woofer Features:
• Forged and machined motor plates with DMA-optimized geometries to create linear motor force under power, leading to outstanding midbass impact, linearity and low distortion
• Large diameter, linear profile, flat spider for linear compliance and outstanding excursion capability
• Center cap designed to optimize the high-frequency response of the woofer for seamless transition to a tweeter’s response
• Oversized voice coil for extended power handling capability, minimizing thermal compression and distortion at higher listening levels
• Cast alloy frame with our Elevated Frame Cooling feature
• Includes fine mesh grilles
C6 Tweeter Features:
• Edge-driven pure silk dome design delivers smooth high-frequency performance, with excellent off-axis response and damping
• Neodymium motor delivers high magnetic flux from a compact motor design
• Ferrofluid cooling and damping improves reliability and response smoothness
• Includes surface- and flush-mount fixtures
Woofer grilles are included, each consisting of a black grille tray and a fine steel mesh grille with an electroformed JL Audio badge logo.
Speakers are sold as a pair.
General Specifications
Continuous Power Handling (RMS) 100 W
Recommended Amplifier Power (RMS) 25 - 150 W / Ch.
System Efficiency 87.37 dB @ 1 W / 1 m
System Nominal Impedance 4 Ω
System Frequency Response 53 Hz – 21 KHz ± 3 dB
| Frame Outer Diameter* (A) | 6.50 in / 165 mm |
| Grille Tray Outer Diameter** (B) | 6.76 in / 172 mm |
| Motor Outer Diameter (C) | 3.54 in / 90 mm |
| Frontal Coaxial Tweeter Protrusion (D) | N/A |
| Frontal Grille Protrusion*** (E) | 1 in / 25 mm |
| Mounting Hole Diameter (F) | 5.46 in / 139 mm |
| Mounting Depth (G) | 2.60 in / 66 mm |
|
*Does not take into account mounting tabs |
|
| Flush Mount Fixture Diameter (A1) | 2.13 in / 54 mm |
| Surface Mount Fixture Diameter (A2) | 2.11 in / 54 mm |
| Flush Mount Mounting Hole Diameter (B) | 1.85 in / 47 mm |
| Flush Mount Mounting Depth (C) | 1.85 in / 47 mm |
| Flush Mount Protrusion (D1) | 0.30 in / 8 mm |
| Surface Mount Protrusion (D2) | 1.04 in / 26 mm |
| Width (W) | 3.36 in / 85 mm |
| Height (H) | 1.44 in / 37 mm |
| Depth (D) | 4.72 in / 120 mm |
